New cold storage design
Systems sized to budget, product, and temperature — with a site survey.
Services
Cold-room design and installation built around your operation
A reliable cold room starts with product data, daily throughput, target temperature, pull-down time, and the way your site operates. Intercooling uses these inputs to design around your production goals, budget, and long-term energy cost.
Need the basics on cold storage? See FAQ or our knowledge articles. FAQ · Knowledge
Scope
Full-scope cold storage design and installation
Expand or extend an existing room
Add storage or temperature zones with as little disruption to production as possible.
Upgrades and energy efficiency
Inverter/VSD, insulation, or controls upgrades to cut power use and frost problems.
Plant and controls replacement
Re-spec equipment to real duty and commission after install.
Repair and maintenance
Preventive maintenance and repairs per contract, so uptime and temperature hold stay protected.
Prefab cold storage supply
Factory-built panels and plant for fast install — well suited to SMEs, F&B, and mobile cold boxes.
Room types
Cold storage types we design and install
Compare chill rooms, freezer rooms, blast chillers, blast freezers, anterooms, and specialty rooms — then match temperature, product, and workflow before design.
Process
How we build cold storage
Seven clear steps from consultation and cooling-load design through installation, commissioning, and after-sales care.
- 01
Consultation
Gather product, temperature, throughput, and workflow requirements
- 02
Site survey
Check space, structure, electrical supply, and install constraints
- 03
System design
Calculate cooling load and specify insulation and refrigeration plant
- 04
Quotation
Confirm scope, budget, and schedule before fabrication starts
- 05
Build & install
Fabricate panels, set plant, and install to the approved design
- 06
Commissioning
Verify temperature hold, equipment operation, and safety before handover
- 07
Handover & care
Train operators, then support warranty and maintenance per contract
Pricing
Cold storage pricing guide
Starting ranges and running-cost references by room size, plus standards and warranty notes. Final price follows the site survey.
Investment
Starting investment by project scale
Small cold room
From 60,000 THB
SME shops, compact prefab rooms, and starter chill storage.
Medium cold room
From 300,000 THB
Mid-size chill or freezer rooms with higher daily throughput.
Industrial cold storage
From 1,000,000+ THB
Large warehouses, multi-zone plants, and complex process rooms.
Figures are for planning only. The final quote depends on insulation, refrigeration plant, electrical work, and site conditions.
Assurance
Standards, safety, and warranty
Standards, materials, and safety
We select insulation, doors, floors, and controls for the temperature duty, then test operation and safety before handover — within the contract scope.
Warranty and after-sales
Warranty details follow the project. After handover, contact us for PM, repairs, and system upgrades.
Running cost
Running cost reference by room size
Estimated daily and monthly electricity under typical duty. Actual use depends on product load, door cycles, and setpoint.
Portfolio
Cold storage build projects
Examples of chill rooms, freezer rooms, blast freezers, and specialty temperature projects we design and install.
FAQ
Questions before you hire a cold storage builder
Answers on scope, pricing, temperature choice, install time, power supply, and after-sales support.
What does cold-room build service include?
New-build design and install, expansions, legacy upgrades, plant and controls replacement, plus repair and maintenance — scoped per project agreement.
What information do you need for a quote?
Share room size, product type, daily throughput, target temperature, and power supply. Floor plans or site photos improve accuracy.
How much does a cold room cost?
Price depends on room size, target temperature, product load, insulation, flooring, electrical work, and site. Small projects often start in the tens to hundreds of thousands of baht; industrial work may start from around one million. Request a survey-based quote for accuracy.
What is the difference between chill, freezer, and blast freezer rooms?
A chill room holds product above freezing (often about 0–10°C). A freezer room stores already-frozen goods (often about −18 to −25°C). A blast freezer is sized for rapid core pull-down at much colder setpoints — it is not a general holding room.
Do you install outside Bangkok?
Yes — we survey and install nationwide. Timeline and travel depend on province and site readiness.
How long does cold room installation take?
Small prefab rooms often install in 1–3 days. Custom or industrial builds typically need 2–6 weeks depending on size, electrical work, and site readiness. We confirm a schedule after survey and scope sign-off.
Should I choose a prefab cold room or a custom build?
Prefab suits compact footprints, starter budgets, and fast install. Custom design fits special sizes, multi-zone temperatures, or process-driven layouts. Our engineers recommend after reviewing your operating data.
Can I run on single-phase or three-phase power?
Some small rooms can run on single-phase power, but mid-to-large rooms and high loads usually need three-phase. Have an engineer check site supply before sizing equipment.
How can a cold room save energy?
Right-sized load design, good insulation and door sealing, inverter/VSD controls, and smart defrost reduce long-term power cost. Over-sizing equipment does not automatically mean lower bills.
What warranty and after-sales support do you provide?
After handover we support preventive maintenance, repairs, and performance upgrades. Warranty details follow each project contract.
Client reviews
Verified feedback from cold storage projects — ratings match the AggregateRating on this page.
5
2 reviews
สุวิมล จิตต์สะอาด
Cold room customer
“The team advised us at every step. The cold room quality is high and performs as expected — truly professional service.”
สมชาย พรหมสวัสดิ์
Food business owner
“We get consistent, reliable cooling. Our operations run smoothly — thank you for the attentive care.”
Get started
Ready to scope your cold storage project?
Share your product, temperature, and site details — our engineers will advise on system type and survey scope.